ASTM A519 Dimensional Table

Thermal Treatment after Final Cold Work Producing Size
	Wall	None, or not exceeding				Heated Above 1100°F. Nominal
Outside	Thickness	1100°F. Nominal				Temperature Without
Diameter	as	Temperature				Accelerated Cooling
Size Range	Percent	OD, in		ID, in		OD, in		ID, in
in	of OD	Over	Under	Over	Under	Over	Under	Over	Under
Up to 0.499	All	0.004	0	—	—	0.005	0.002	—	—
0.500-1.699	All	0.005	0	0	0.005	0.007	0.002	0.002	0.007
1.700-2.099	All	0.006	0	0	0.006	0.006	0.005	0.005	0.006
2.100-2.499	All	0.007	0	0	0.007	0.008	0.005	0.005	0.008
2.500-2.899	All	0.008	0	0	0.008	0.009	0.005	0.005	0.009
2.900-3.299	All	0.009	0	0	0.009	0.011	0.005	0.005	0.011
3.300-3.699	All	0.01	0	0	0.01	0.013	0.005	0.005	0.013
3.700-4.099	All	0.011	0	0	0.011	0.013	0.007	0.01	0.01
4.100-4.499	All	0.012	0	0	0.012	0.014	0.007	0.011	0.011
4.500-4.899	All	0.013	0	0	0.013	0.016	0.007	0.012	0.012
4.900-5.299	All	0.014	0	0	0.014	0.018	0.007	0.013	0.013
5.300-5.549	All	0.015	0	0	0.015	0.02	0.007	0.014	0.014
5.500-5.999	Under 6	0.01	0.01	0.01	0.01	0.018	0.018	0.018	0.018
	6 to 7-1/2	0.009	0.009	0.009	0.009	0.016	0.016	0.016	0.016
	over 7-1/2	0.018	0	0.009	0.009	0.017	0.015	0.016	0.016
6.000-6.499	Under 6	0.013	0.013	0.013	0.013	0.023	0.023	0.023	0.023
	6 to 7-1/2	0.01	0.01	0.01	0.01	0.018	0.018	0.018	0.018
	over 7-1/2	0.02	0	0.01	0.01	0.02	0.015	0.018	0.018
6.500-6.999	Under 6	0.015	0.015	0.015	0.015	0.027	0.027	0.027	0.027
	6 to 7-1/2	0.012	0.012	0.012	0.012	0.021	0.021	0.021	0.021
	over 7-1/2	0.023	0	0.012	0.012	0.026	0.015	0.021	0.021
7.000-7.499	Under 6	0.018	0.018	0.018	0.018	0.032	0.032	0.032	0.032
	6 to 7-1/2	0.013	0.013	0.013	0.013	0.023	0.023	0.023	0.023
	over 7-1/2	0.026	0	0.013	0.013	0.031	0.015	0.023	0.023
7.500-7.999	Under 6	0.02	0.02	0.02	0.02	0.035	0.035	0.035	0.035
	6 to 7-1/2	0.015	0.015	0.015	0.015	0.026	0.026	0.026	0.026
	over 7-1/2	0.029	0	0.015	0.015	0.036	0.015	0.026	0.026
8.000-8.499	Under 6	0.023	0.023	0.023	0.023	0.041	0.041	0.041	0.041
	6 to 7-1/2	0.016	0.016	0.016	0.016	0.028	0.028	0.028	0.028
	over 7 1¼2	0.031	0	0.015	0.016	0.033	0.022	0.028	0.028
8.500-8.999	Under 6	0.025	0.025	0.025	0.025	0.044	0.044	0.044	0.044
	6 to 7-1/2	0.017	0.017	0.017	0.017	0.03	0.03	0.03	0.03
	over 7-1/2	0.034	0	0.015	0.019	0.038	0.022	0.03	0.03
9.000-9.499	Under 6	0.028	0.028	0.028	0.028	0.045	0.045	0.045	0.045
	6 to 7-1/2	0.019	0.019	0.019	0.019	0.033	0.033	0.033	0.033
	over 7-1/2	0.037	0	0.015	0.022	0.043	0.022	0.033	0.033
9.500-9.999	Under 6	0.03	0.03	0.03	0.03	0.045	0.045	0.053	0.053
	6 to 7-1/2	0.02	0.02	0.02	0.02	0.035	0.035	0.035	0.035
	over 7-1/2	0.04	0	0.015	0.025	0.048	0.022	0.035	0.035
10.000-10.999	Under 6	0.034	0.034	0.034	0.034	0.045	0.045	0.06	0.06
	6 to 7-1/2	0.022	0.022	0.022	0.022	0.039	0.039	0.039	0.039
	over 7-1/2	0.044	0	0.015	0.029	0.055	0.022	0.039	0.039
11.000-12.000	Under 6	0.035	0.035	0.035	0.035	0.05	0.05	0.065	0.065
	6 to 7- 1/2	0.025	0.025	0.025	0.025	0.045	0.045	0.045	0.045
	over 7-1/2	0.045	0	0.015	0.035	0.06	0.022	0.045	0.045

Previous：ASTM A53 Dimensional Table

Next：ASTM A335 Dimensional Table