At present, in various industries, there are various ways of connecting pipes and pipes. The first is to use flanges for connection. This method of using flanges for connection is relatively traditional. Both ends of seamless steel pipes can be connected. When the flange is connected to the pipe, only the method at both ends is required. The bolts used on the flange and the pipe can be fixed. For choosing this installation method, one-way installation is basically possible, and the sensor volume limit of this connection method pipe is relatively small, so this is only suitable for use in some relatively small pipes. Another way to install seamless steel pipes is to install connections. This connection method is more advanced, and some conveyors without flange connection holes are currently connected by such a connection method. This connection method currently seems to be relatively simple.
The characteristics of seamless steel pipes are that the medium loss for transportation is relatively small, and the range is large, and the degree of stability is extremely high. During the transportation, the transportation of water flow is almost not affected by the corresponding environmental parameters such as density, pressure and temperature. So now many industries and fields will use this kind of pipe, because the reliability of this kind of pipe is very reliable, and there are not too many movable machine parts inside the pipe, and the workload for later maintenance is relatively small, and it can maintain one. Long-term stable working condition. It's just that before using water flow transportation, you must ensure that the pipe is correctly installed on the pipe to avoid unnecessary transportation losses during the later transportation and use.